From DDL Wiki

Revision as of 14:59, 3 September 2008 (view source) Jeremy Michalek (Talk | contribs) ← Older edit		Current revision (15:00, 3 September 2008) (view source) Jeremy Michalek (Talk | contribs) (→Links)
Line 85:		Line 85:
	=Links=		=Links=
		+	* Taxonomy of manufacturing processes http://en.wikipedia.org/wiki/Taxonomy_of_manufacturing_processes
	* Manufacturing http://en.wikipedia.org/wiki/Category:Manufacturing		* Manufacturing http://en.wikipedia.org/wiki/Category:Manufacturing
	* Metalworking http://en.wikipedia.org/wiki/Metalworking		* Metalworking http://en.wikipedia.org/wiki/Metalworking
	[[category:manufacturing]]		[[category:manufacturing]]

---

Current revision

A list of some manufacturing methods for a variety of materials:

Contents 1 General Classification 2 By Material 2.1 Metals 2.1.1 Subtractive 2.1.2 Hot forming 2.1.3 Cold forming 2.1.4 Joining 2.2 Plastics 2.2.1 Thermoplastics 2.2.2 Thermosetting plastics 2.3 Rubbers 2.4 Glass 2.5 Woods 2.6 Ceramics 3 References 4 Links

General Classification

1. Casting & Molding: molten material poured or forced into a mold and cooled to solidify
2. Powders: particle consolidation
3. Deformation: plastic deformation to form shape, hot or cold, forging, rolling, extrusion
4. Subtractive: material removed to make shape, machining, cutting
5. Heat Treatment: to alter mechanical properties or surface treatment
6. Joining & Assembly: welding, riveting, adhesives, snap fits, fasteners

By Material

Metals

Subtractive

• Drilling
• Reaming
• Boring
• Turning
• Milling
• Grinding
• Shearing (stamping)
• Etching
  • Wet Etching
• Threading

Hot forming

• Casting
  • Sand casting
  • Centrifugal casting
  • Lost wax casting
  • Continuous casting of sheet metal
• Hot rolling
• Extruding
• Forging
• Spray deposition

Cold forming

• Cold rolling
• Coining
• Bending (stamping)
• Drawing
• Deep drawing
• Spinning

Joining

• TIG welding

Plastics

Thermoplastics

• Injection molding
• Blow molding (bottles)
• Vacuum forming
• Extruding

Thermosetting plastics

• Molding
• Foaming
• Machining

Rubbers

• Molding (hot vulcanizing)
• Casting (room temperature vulcanizing)

Glass

• Blow molding (bottles)
• Pressing (ash trays)
• Floating (windows)

Woods

• Planing and shaping
• Sawing
• Turning
• Steam bending
• Routing

Ceramics

• Throwing
• Molding
• Firing
• Machining (for special ceramics)

References

• Kalpakjian, S. Manufacturing Processes for Engineering Materials, Addison Wesley Longman, Inc.
• Dieter, G. and L. Schmidt Engineering Design Fourth Edition, McGraw Hill 2009.

Links

• Taxonomy of manufacturing processes http://en.wikipedia.org/wiki/Taxonomy_of_manufacturing_processes
• Manufacturing http://en.wikipedia.org/wiki/Category:Manufacturing
• Metalworking http://en.wikipedia.org/wiki/Metalworking